Go
or browse by category
    Take a 25 question quiz to test and certify your knowledge of the tutorial-video course
    Buchla 101 - The 200e Series Modules.
    Get a mark of 80% or higher to pass this quiz!
    • 1

      What needs to be lit on each module of the system in order for the knobs settings to be memorized?

    • 2

      Sending a pulse voltage to the Low Pass mode is called...

    • 3

      in the Timbre Section of the 259e Twisted Waveform Generator, you can create...

    • 4

      The Modulation Oscillator of the 261e Complex Waveform Generator outputs...

    • 5

      How many types of random voltages are there in the Source of Uncertainty?

    • 6

      What is the basis of much of Don Buchla's work?

    • 7

      You're only as expressive as your...

    • 8

      On the 266e Source of Uncertainty module, Random Control Voltages can be sent to:

    • 9

      On the 281e Quad Function Generator , Pulse CVs are usually applied to...

    • 10

      The Timbre section of the 261e Complex Waveform Generator lets you...

    • 11

      On 261e Complex Waveform Generator, the Modulation Modes do not include...

    • 12

      Since 00 is the first stage, an 8 stage sequence would end at...

    • 13

      The Triple Morphing Filter is a:

    • 14

      When both lights are off by the green Clock button on the 223e Input Port module, the module receives...

    • 15

      Back in the day, Allen Strange called presets:

    • 16

      The 292e Quad Dynamics Generator cannot be a...

    • 17

      When scanning the twisted waveforms with the Mem Skew knob, there are moments of...

    • 18

      When you turn on the system the Preset Manager runs through a routine to:

    • 19

      The Amplitude section of the 291e Triple Morphing Filter can be used as a VCA. True or false?

    • 20

      In the Timbre Section of the of the 261e Complex Waveform Generator, all knobs turned counter clockwise produce...

    • 21

      Which 3 modules comprise a basic Buchla system?

    • 22

      The 256e is good for scaling CV inputs on other modules that don't have:

    • 23

      The L keypad can be programmed for Pressure, Location and

    • 24

      The Morph knob of the 259e cross fades between...

    • 25

      The Stage Edit section of the 251e Sequential Voltage Source micromanages...

    Buchla 101
    The 200e Series Modules
    You have answered 0 out of 25 questions.
    You must login to take this quiz.
    If you do not have an account, please sign up.
    Get Your Grade Cancel Quiz
    Feedback
    Course Advisor
    Don't Know Where To Start?
    Ask A Course Advisor
    Ask Us!
    Copy the link below and paste it into an email, forum, or Facebook to share this with your friends.
    copy
    Make money when you share our links
    Become an Ask.Video Affiliate!
    The current affiliate rate is: 50%
    Sign Up
    Classes Start Next Week!
    Live 8-week Online Certification Classes for: