Library
Classrooms
Curriculums
Articles
Pricing
Faculty
AudioPedia
Support
Login
Sign Up
Share
10
Go
or browse by category
Audio
Video
Graphics
Productivity
Web
Take a 25 question quiz to test and certify your knowledge of the tutorial-video course
Pro Tools 104 - Mixing & Automation.
Get a mark of 80% or higher to pass this quiz!
1
ADT stands for
Automatic Delay Transformer, which is used to modulate the delay time
Artificial Double-Tracking, which is the technical name for electronic doubling
Automated Dual-Taping, which is an emulation of an old analog mixing trick
Active Digital Transfer, which is used to render a second musical part
2
How do you call an Expander that's used to remove low-level noise and leakage?
a Noise Gate
a compressor
a Strip Silencer
a Limiter
3
Two types of reverb processors are:
automatic reverbs and manual reverbs
wet reverbs and dry reverbs
algorithmic reverbs and convolution reverbs
spring and fall reverbs
4
Master bus processing...
Is only used when mastering
is up to the mix engineer; some use it, some don't
must never be used at the mix stage, no exceptions
is always required for every mix, no exceptions
5
Two types of bussing include:
Automation and Clip Gain
Master Stereo Bus and Elastic Audio
Subgroups and Send & Return
Instrument and Audio tracks
6
Mixing means...
matching the overall tonal balance of all the songs included on an album
matching and balancing the overall level of all the songs included on an album
setting the levels & pans and applying processing to the individual tracks in a multitrack session
the same as recording
7
Setting level and pan is a mixing activity. True or false?
True
False
8
Staggering frequency ranges when EQing a mix means...
boosting several tracks at the same (or a similar) frequency for tonal power
mixing while slightly drunk, to get a better sense of the overall tonal balance
boosting one track and cutting another at the same (or a similar) frequency for tonal clarity
9
Within a Channel Strip, the actual order of signal flow is...
Input, Inserts, Pre-Fader Sends, Pan, Channel Fader, Post-Fader Sends, Output
Input, Inserts, Pre-Fader Sends, Pan, Channel Fader, Output
Input, Inserts, Pre-Fader Sends, Channel Fader, Post-Fader Sends, Pan, Output
Input, Inserts, Post-Fader Sends, Channel Fader, Pre-Fader Sends, Pan, Output
10
When a Mix Group is assigned to a VCA Fader...
you can't adjust the individual faders while the VCA link is active
you can adjust the individual faders even while the VCA link is active
Groups can't be assigned to VCA Faders
11
For mixing, the metering would normally be set to:
pre-fader metering
post-fader metering
off
12
What are the sections of a Channel Strip in Pro Tools?
Inserts, Sends, Audio, Video, Channel Fader
Inserts, Sends, Elastic Audio, Channel Fader
Inserts only
Inserts, Sends, I/O, Pan, Channel Fader
13
The one hard-and-fast rule in modern mixing is...
the snare drum must always be the loudest element in the mix
the kick drum must always be the loudest element in the mix
there are no hard-and-fast rules in mixing
the vocal must always be at least 3 dB louder than any other track in the mix
14
In an Automation display, the Trim tool...
can create Automation level automatically by using A.I.
can correct for a poorly chosen Automation level by using A.I.
can drag a selected section of automation data up or down
does nothing-it does not function in an Automation display
15
Name 2 ways to create Automation in Pro Tools.
Write or Latch
Draw it in with the pencil or draw it in with the mouse
Record it in realtime by moving faders & controls or draw it in
Copy it or paste it in
16
What are the five basic Automation modes in Pro Tools?
Read, Write, Touch, Trim, and Fade
Read, Write, Latch, Trim, and Slice
Off, Read, Write, Touch, and Latch
Read, Write, Latch, Trim, and Save
17
Delay-based effects like Flanging and Chorusing incorporate
periodic LFO modulation to impart movement to the effect
a very low Threshold combined with a soft knee setting
delay times above 100 milliseconds, for clarity
reverb
18
Inserts...
are only found in the Master Fader channel strip
precede the channel fader, except in the Master Fader
follow the channel fader, except in the Master Fader
are only found on Instrument tracks
19
Mix processing includes:
EQ, Dynamics, Elastic Audio, Auto-Punch
EQ, Dynamics, Delay, Reverb
Recording and Automation
EQ, Compression, Overdubbing, Comping
20
The best way to approach a mix is to...
process individual channels first; when they're completely done, then blend them in the mix
do a full level & pan mix first; when that's final, then process the tracks individually
go back & forth between processing individual tracks and adjusting the full mix
21
When you use the Bounce-to-Disk command...
you make a full backup of both the Session File and all the individual audiofiles in the session
you make a full backup of all the individual audio files in the session
you create a new stereo audiof ile of the full mix
it creates a great-sounding master automatically
22
Mixing in Pro Tools can include:
tracking, overdubbing, and comping
recording, editing, and mastering
level balance, panning, processing, and automation
composing, recording and mastering
23
Clip Gain differs from regular (track) Automation in that...
it can change the level of the audio at different points in the song/session
there is no difference
it affects the audio signal after the signal passes through the inserts
it affects the audio signal before the signal reaches the channel strip
24
Hard-panning a stereo track or a stereo-doubled track means
using M/S processing
panning both the left & right sides to the center, creating a hard mono signal
panning the left & right sides only part of the way left & right
panning the left & right sides all the way left & right
25
Which type of track incorporates both audio and MIDI data?
Audio track
Instrument track
MIDI track
Pro Tools 104
Mixing & Automation
You have answered
0
out of 25
questions.
You must
login
to take this quiz.
If you do not have an account, please
sign up
.
Get Your Grade
Cancel Quiz
Nice try! Unfortunately you didn't have enough correct answers to pass the quiz. No sweat! You can retake a quiz once per day.
-
-
You need 80% to pass this quiz
Retake Quiz
Back to the Course
View My Grades
Feedback
How are we doing?
We'd love your thoughts, feedback and questions regarding our new site. All feedback is appreciated!
We do not respond to this form! If you need support, please visit our
support page
.
Thank you for your input!
Your message has been successfully sent
Course Advisor
Don't Know Where To Start?
Ask A Course Advisor
Ask Us!
Copy the link below and paste it into an email, forum, or Facebook to share this with your friends.
copy
Make money when you share our links
Become an Ask.Video Affiliate!
The current affiliate rate is: 50%
Sign Up
Facebook
Twitter
Linkedin
Google+
Reddit
Pinterest
Classes Start Next Week!
Live 8-week Online Certification Classes for:
Logic Pro X
Learn More
Ableton Live
Learn More
Bitwig
Learn More
