Library
Articles
Pricing
Faculty
AudioPedia
Support
Login
Sign Up
Share
Go
or browse by category
Audio
Video
Graphics
Productivity
Web
Take a 20 question quiz to test and certify your knowledge of the tutorial-video course
Audio Concepts 203 - Advanced Metering.
Get a mark of 80% or higher to pass this quiz!
1
VU Meters, Peak Meters and Oscilloscopes are available in both analog and digital metering. True or false?
True
False
2
When Recording into a DAW...
levels should always be at least -1dBfs
levels should be pushed slightly into the red (>0dBfs) for digital warmth
levels should max out at around -6dBfs or less
3
Spectral Editing
can be used to automatically pitch-correct audio recordings
can be used to shape the tone of various instrument patches
can be used to extract sounds embedded in a complex audio wave
can automatically calculate the best EQ for an audio track in a mix
4
LUFS is an acronym for...
Level Units For Stereo
Loudness Units For Stereo
Loudness Units Full Sampling
Loudness Units (referenced to) Full Scale
5
A Gain-Reduction meter...
indicates the correct level to set in the Stereo Master channel
shows the amount of attenuation when a compressor is active
indicates the maximum level of the audio signal in the Stereo Master channel
reduces a signal's dynamic range
6
What is a Transient?
An individual with no fixed address
The range between the noise floor and the maximum output level
The brief (~10-20ms) impact at the beginning of a (percussive) sound
The low-level sustain or decaying portion of a sound
7
Streaming services Spotify, Tidal, and YouTube have not adopted any standards for average streaming levels. True or false?
True
False
8
A Vectorscope shows...
pitch information for the left and right channels
the audio as a continuous line or in segments (i.e. third-octave)
phase information for the left and right channels
frequency information for the left and right channels
9
A Spectrum Analyzer...
can shows the audio as a continuous line or in segments (i.e. third-octave)
shows phase information for the left and right channels
is often included in an EQ plug-in
is a realtime display of frequency vs amplitude
10
An Oscilloscope display (or the display in a DAW;s Region/Clip) shows...
amplitude vs time
frequency vs time
amplitude vs frequency
11
A Balance Meter shows...
variations in level between the different tracks in a multi-channel mix
phase information for the left and right channels
variations in the overall left-right balance of a mix
variations in level when compression is being applied
12
A Spectrogram shows...
variations in the overall left-right balance of a mix
pitch, rhythm, and harmony
amplitude, frequency, and time
phase differentials between the left and right channels
13
In a DAW channel, an Exponential meter scale...
has equal spacing per dB
has wider spacing per dB at the top of the meter
has wider spacing per dB at the bottom of the meter
14
A Spectrogram in a Virtual Instrument
can be used to extract sounds embedded in a complex audio wave
can be used to fix pitch anomalies in the samples in a virtual instrument
can be used to automatically tune multi-samples to correct pitch
can be used to shape the tone of various instrument patches
15
What is the Loudness War?
A reference to the practice of Loudness Maximizing
A reference to the practice of listening to music very loud when mixing or mastering
A reference to the different loudness standards for Broadcast and Music
A reference to the practice of turning an amp up to eleven
16
The ITU BS.1770 broadcast loudness recommendations are the backbone for several mandated loudness standards. True or false?
True
False
17
0 dBu is equivalent to 0 dBfs. True or False?
False
True
18
A True Peak meter...
averages the level of all peaks for a true peak reading
factors in potential inter-sample peaks
only shows peak overages that will sound noticeably distorted
19
The Oscilloscope, Vectorscope, Goniometer, Correlation Meter, Peak Meter, and VU Meter are ALL audio meters. True or false?
True
False
20
The traditional recommendation for the Stereo Master fader is...
to be automated based on the levels of the different musical sections in a song
to always be left at Unity Gain
to always be lowered by at least 12dB or more
to always be lowered by at least 24dB or more
Audio Concepts 203
Advanced Metering
You have answered
0
out of 20
questions.
You must
login
to take this quiz.
If you do not have an account, please
sign up
.
Get Your Grade
Cancel Quiz
Nice try! Unfortunately you didn't have enough correct answers to pass the quiz. No sweat! You can retake a quiz once per day.
-
-
You need 80% to pass this quiz
Retake Quiz
Back to the Course
View My Grades
Feedback
How are we doing?
We'd love your thoughts, feedback and questions regarding our new site. All feedback is appreciated!
We do not respond to this form! If you need support, please visit our
support page
.
Thank you for your input!
Your message has been successfully sent
Course Advisor
Don't Know Where To Start?
Ask A Course Advisor
Ask Us!
Copy the link below and paste it into an email, forum, or Facebook to share this with your friends.
copy
Make money when you share our links
Become an Ask.Video Affiliate!
The current affiliate rate is: 50%
Sign Up
Facebook
Twitter
Linkedin
Google+
Reddit
Pinterest
Classes Start Next Week!
Live 8-week Online Certification Classes for:
Logic Pro X
Learn More
Ableton Live
Learn More
Bitwig
Learn More
