or browse by category
Take a 17 question quiz to test and certify your knowledge of the tutorial-video course
Neutron 3 101 - Mixing With Neutron 3.
Get a mark of 80% or higher to pass this quiz!
Neutron 3's Transient Shaper...
is a brickwall limiter that prevents transients from causing digital overloads
can increase or decrease the Attack and Sustain of notes in a track
is a brickwall limiter that can be used for the purpose of loudness maximizing
must render a new audio file destructively to create its effect
The Track Enhance feature in Neutron 3...
arranges the modules and makes permanent settings that can't be changed
arranges and makes Suggested settings in the various processing modules
automatically applies Strip Silencing to a track
automatically Comps a track with multiple takes
The Mix Assistant's Balance feature...
relies on IPC to auto-mix the levels of Neutron/Relay-equipped channels in a mix
automatically analyzes the stereo balance of the mix and centers it
automatically analyzes the stereo balance of the mix and creates a proper mono mix
allows for automatic level control of any standard brand/type of plug-in
Neutron 3 combines...
EQ, Compression, Delay, Reverb, and Distortion effects
Ozone, RX, and Nectar into one plug-in
all of iZotope's other processing plug-ins into one plug-in
channel strip processing with intelligent mixing features
Neutron 3's Sculptor module...
allows the user to fine-tune its automatic processing with simple controls
applied automatic EQ, reverb, and delay effects to a track
has no user controls over its automatic processing
avoids any automatic processing in favor of manual EQ and compression adjustments
The Visual Mixer's graphic mixing display...
shows and allows the editing of level, pan, and stereo width for each enabled track
shows the types of effect processing used on each track
indicates whenever the overall mix level exceeds digital maximum (0dBfs)
shows the tonal (frequency) balance of all tracks in its display
Neutron 3's Compressor...
has no automatic makeup gain or auto-release features
includes both clean and Vintage modes
must have the same mode selected (clean or Vintage) for both compressor modules
can be selected in only one of the 5 module slots
The Tonal Balance Control plug-in...
lets the user make per-track changes to compression from within the TBC plug-in
lets the user make per-track changes to all delay effects from within the TBC plug-in
automatically readjusts the EQ settings of a mix for mastering purposes
lets the user make per-track EQ changes from within the TBC plug-in
What is iZotope's Neutron 3?
A plugin that includes a display that detects out-of-tune pitch variations in a vocal track
A Channel Strip with intelligent mixing features
A plugin identical to Ozone, but for people with less mastering experience
A plug-in suite for all the standard delay-based effects
What are Neutron Exciter's 4 saturation types?
Tube, Tape, Retro, and Warm
Preamp, Poweramp, Rectifier, and FET tube
Tube, Transistor, Transformer, Trash
FET, Diode, Germanium, and Silicon
Track Enhance is an intelligent processor. True or false?
Neutron 3's Limiter has three modes:
LL, SB, and MB
Peak, Average, and Clipping
clean, vintage, and distortion
IRC LL, IRC II, and Hard
The Relay plug-in...
determines the tempo of the audio in a track via an internal tap-tempo algorithm
taps the signal on a track and duplicates it in another channel strip
allows tracks with no Neutron 3 processors to be included in the Visual Mixer display
is a specialized send-return plug-in that offers i/o to/from the analog world
Neutron 3's Masking Meter...
indicates how much brickwall masking to apply in mastering
determines the parts of a song where masking should be added
displays the potential overloads caused by the Masking Limiter
displays the frequencies where one track may be masking another
The main modules in Neutron 3 are...
EQ (x2), Compressor, Delay, Reverb, Transient Shaper, Gate, Exciter
EQ, Compressor (x2), Exciter, Transient Shaper, Gate, Sculptor
EQ (x2), Compressor, Reverb, Transient Shaper, Gate, Exciter
EQ, Compressor, Exciter, Delay (x2), Transient Shaper, Gate
Neutron 3's Dynamic EQ...
lets the amount of boost or cut in a Band be determined by signal level
is an EQ specifically designed to be used on louder, more aggressive tracks and mixes
is a module that combines Neutron's standard Compressor and EQ modules into one
is not really an EQ at all, but a compressor that adds a fixed amount of EQ for presence
Neutron 3's Gate...
implements Gating by making all automatic settings, with no user controls
implements Hysteresis as separate Open and Close Thresholds
can only be used in the first slot
cannot be used at the same time as the compressor
Neutron 3 101
Mixing With Neutron 3
You have answered
out of 17
to take this quiz.
If you do not have an account, please
Get Your Grade
Nice try! Unfortunately you didn't have enough correct answers to pass the quiz. No sweat! You can retake a quiz once per day.
You need 80% to pass this quiz
Back to the Course
View My Grades
How are we doing?
We'd love your thoughts, feedback and questions regarding our new site. All feedback is appreciated!
We do not respond to this form! If you need support, please visit our
Thank you for your input!
Your message has been successfully sent
Don't Know Where To Start?
Ask A Course Advisor
Copy the link below and paste it into an email, forum, or Facebook to share this with your friends.
Make money when you share our links
Become an Ask.Video Affiliate!
The current affiliate rate is: 50%
Classes Start Next Week!
Live 8-week Online Certification Classes for:
Logic Pro X