Library
Classrooms
Curriculums
Articles
Pricing
Faculty
AudioPedia
Support
Login
Sign Up
Share
Go
or browse by category
Audio
Video
Graphics
Productivity
Web
Take a 25 question quiz to test and certify your knowledge of the tutorial-video course
Pro Tools 104 - Mixing & Automation.
Get a mark of 80% or higher to pass this quiz!
1
Setting level and pan is a mixing activity. True or false?
False
True
2
Name 2 ways to create Automation in Pro Tools.
Copy it or paste it in
Record it in realtime by moving faders & controls or draw it in
Write or Latch
Draw it in with the pencil or draw it in with the mouse
3
For more subtle, gradual overall compression, you might dial up...
a lower Threshold and Ratio, possibly combined with a soft-Knee setting
a very high Threshold and Ratio, always combined with a hard-Knee setting
a saturator
a Brickwall Limiter
4
When a Mix Group is assigned to a VCA Fader...
you can't adjust the individual faders while the VCA link is active
Groups can't be assigned to VCA Faders
you can adjust the individual faders even while the VCA link is active
5
Staggering frequency ranges when EQing a mix means...
boosting several tracks at the same (or a similar) frequency for tonal power
mixing while slightly drunk, to get a better sense of the overall tonal balance
boosting one track and cutting another at the same (or a similar) frequency for tonal clarity
6
Inserts...
follow the channel fader, except in the Master Fader
are only found in the Master Fader channel strip
precede the channel fader, except in the Master Fader
are only found on Instrument tracks
7
Within a Channel Strip, the actual order of signal flow is...
Input, Inserts, Pre-Fader Sends, Pan, Channel Fader, Output
Input, Inserts, Post-Fader Sends, Channel Fader, Pre-Fader Sends, Pan, Output
Input, Inserts, Pre-Fader Sends, Channel Fader, Post-Fader Sends, Pan, Output
Input, Inserts, Pre-Fader Sends, Pan, Channel Fader, Post-Fader Sends, Output
8
The one hard-and-fast rule in modern mixing is...
there are no hard-and-fast rules in mixing
the snare drum must always be the loudest element in the mix
the kick drum must always be the loudest element in the mix
the vocal must always be at least 3 dB louder than any other track in the mix
9
Delay-based effects like Flanging and Chorusing incorporate
periodic LFO modulation to impart movement to the effect
reverb
delay times above 100 milliseconds, for clarity
a very low Threshold combined with a soft knee setting
10
Hard-panning a stereo track or a stereo-doubled track means
panning the left & right sides only part of the way left & right
using M/S processing
panning both the left & right sides to the center, creating a hard mono signal
panning the left & right sides all the way left & right
11
Clip Gain differs from regular (track) Automation in that...
it affects the audio signal before the signal reaches the channel strip
it affects the audio signal after the signal passes through the inserts
it can change the level of the audio at different points in the song/session
there is no difference
12
What are the five basic Automation modes in Pro Tools?
Read, Write, Latch, Trim, and Save
Off, Read, Write, Touch, and Latch
Read, Write, Touch, Trim, and Fade
Read, Write, Latch, Trim, and Slice
13
Mixing in Pro Tools can include:
recording, editing, and mastering
tracking, overdubbing, and comping
level balance, panning, processing, and automation
composing, recording and mastering
14
The best way to approach a mix is to...
go back & forth between processing individual tracks and adjusting the full mix
process individual channels first; when they're completely done, then blend them in the mix
do a full level & pan mix first; when that's final, then process the tracks individually
15
How do you call an Expander that's used to remove low-level noise and leakage?
a Limiter
a compressor
a Strip Silencer
a Noise Gate
16
For mixing, the metering would normally be set to:
pre-fader metering
off
post-fader metering
17
Which type of track incorporates both audio and MIDI data?
MIDI track
Instrument track
Audio track
18
Mix processing includes:
EQ, Compression, Overdubbing, Comping
EQ, Dynamics, Delay, Reverb
EQ, Dynamics, Elastic Audio, Auto-Punch
Recording and Automation
19
Two types of reverb processors are:
automatic reverbs and manual reverbs
algorithmic reverbs and convolution reverbs
spring and fall reverbs
wet reverbs and dry reverbs
20
In an Automation display, the Trim tool...
can drag a selected section of automation data up or down
does nothing-it does not function in an Automation display
can create Automation level automatically by using A.I.
can correct for a poorly chosen Automation level by using A.I.
21
Master bus processing...
is up to the mix engineer; some use it, some don't
is always required for every mix, no exceptions
must never be used at the mix stage, no exceptions
Is only used when mastering
22
What are the sections of a Channel Strip in Pro Tools?
Inserts only
Inserts, Sends, Elastic Audio, Channel Fader
Inserts, Sends, Audio, Video, Channel Fader
Inserts, Sends, I/O, Pan, Channel Fader
23
Mixing means...
matching and balancing the overall level of all the songs included on an album
matching the overall tonal balance of all the songs included on an album
setting the levels & pans and applying processing to the individual tracks in a multitrack session
the same as recording
24
Two types of bussing include:
Master Stereo Bus and Elastic Audio
Automation and Clip Gain
Subgroups and Send & Return
Instrument and Audio tracks
25
ADT stands for
Automated Dual-Taping, which is an emulation of an old analog mixing trick
Automatic Delay Transformer, which is used to modulate the delay time
Active Digital Transfer, which is used to render a second musical part
Artificial Double-Tracking, which is the technical name for electronic doubling
Pro Tools 104
Mixing & Automation
You have answered
0
out of 25
questions.
You must
login
to take this quiz.
If you do not have an account, please
sign up
.
Get Your Grade
Cancel Quiz
Nice try! Unfortunately you didn't have enough correct answers to pass the quiz. No sweat! You can retake a quiz once per day.
-
-
You need 80% to pass this quiz
Retake Quiz
Back to the Course
View My Grades
Feedback
How are we doing?
We'd love your thoughts, feedback and questions regarding our new site. All feedback is appreciated!
We do not respond to this form! If you need support, please visit our
support page
.
Thank you for your input!
Your message has been successfully sent
Course Advisor
Don't Know Where To Start?
Ask A Course Advisor
Ask Us!
Copy the link below and paste it into an email, forum, or Facebook to share this with your friends.
copy
Make money when you share our links
Become an Ask.Video Affiliate!
The current affiliate rate is: 50%
Sign Up
Facebook
Twitter
Linkedin
Google+
Reddit
Pinterest
Classes Start Next Week!
Live 8-week Online Certification Classes for:
Logic Pro X
Learn More
Ableton Live
Learn More
Bitwig
Learn More
